1x12x10 rough sawn pine

I tire of seeing people being beat up for wanting to use full dimension lumber. 2022 Reliance Timber All Rights Reserved | Made with in Boone. Planing doesn't straighten lumber appreciably (not more than 1/2" in the length of the board (if you were to joint it, which most planers can't do). So what if pre-hung doors are setup for an undersized wall? Our Rough Sawn Pine lumber is a rough sawn classic option for interior and exterior projects. But does it really matter with lumber if you sell a 2x4x8' by the piece, or convert to BF (5.33 BF), or sell it by the actual size (500 cubic inches or 8259 cubic cm)? Eastern White Pine is a pliable softwood with a straight and even grain that takes staining well and bonds well with glue. Reliance Timber Rough Sawn Pine is an excellent choice for interior pieces of a home or project, such as boards in the internal framing.

Well, the facts are simple--more wood, more load carrying capacity, modern structural engineering has integrated these sizes into their tables, and it doesn't cause any loss of strength in the structure, because the structures are designed for the smaller lumber. If I sell hardwood lumber to a customer, I measure the piece and sell it to him based on the actual size of the piece. Of course, you could add a little wane or a beaver tail to the end of the first piece and get even less than 132 cubic inches of wood per BF! Forum Responses Take a piece of lumber that is 1.00 inch thick x 5.51 inches wide x 12.00 feet long. Job Opportunities and Woodworking Services, Dust Collection, Safety and Plant Operation, Dry Kiln Schedules for Commercial Woods - Temperate and Tropical.

The reason for it being that way is because it has been that way, but that doesn't make it right. WOODWEB is a registered trademark of Woodweb.com. A board foot is 12 inches square by 1 inch thick or any other way you get 144 square inches. Since we do not mill Rough Sawn Pine, this wood style provides a natural feel. That way it's the fairest to me and to him. A lot of people crab about how you should cut your lumber to dressed sizes because it is so much more difficult to do the windows and doors in a home framed with full dimension lumber.

Rough Sawn Pine planks are typically thicker and heavier than standard surfaced wood choices, making them a good option when strength and sturdiness are crucial. Lumber is indeed sold by the board foot.

In a custom built home, what is stopping you from building your own doorjambs? This size is the size when the piece was graded, so if it dries out it will be a little smaller; if it gains moisture, a little bigger. Somewhere in the archives you can get board feet measurements of logs. The way things are done on the small scale and the way they are done on the large scale are totally different. Well, every time I see an article about installing or trimming windows, they are having to build up the casing to make up for the difference between the stock 3 1/2" casing, and the 5 1/2" wall bay, so if you are doing this already, then what is another 1/2"? I don't round up or down. Due to the lower cost and higher wood quality, Do-It-Yourself woodworkers and hobbyists prefer rough sawn pine for their projects. The natural look makes these planks perfect for outdoor furniture like picnic tables and chairs or even swing sets. The explanation for why we should accept "dressed" lumber it that it doesn't weaken it.

Rough sawn pine, full dimension, color variation. Those shavings are worth more than the cost to make them, or as in a lot of new mills, lumber is sawn very close to finish size--1 3/4 for a 2X and then dressed down to finish size. It does not have to do with scale, it has to do with the measure, which for hardwoods does not have fractions. But the BF stays the same 10 BF per piece. Also, because hardwoods only use BF to the closest foot, 1 BF is the size of a piece of hardwood lumber ranging from 6" to 18" wide and 12" (1 foot) long by 1.00 to 1.24 inches thick. It allows the woodworker or builder to have enough wood for a reasonable margin of error while saving money. A board foot is thickness X width X length divided by 144 = bf. Rough Sawn Pine is untreated timber cut into planks and is often stronger than other types of wood, but since we do not kiln-dry it, it contains a higher moisture content.

lumber pine rough 1x12 cut renovation ontario dry materials favourite Also, if you sell a dry, planed piece of hardwood lumber that is 1.00 x 11.51 x 10.5', this is actually considered as 5/4, so it is 12 BF (the first piece) and 13 BF the second piece, etc.

Current terminology is all skewed way out of line. With unplaned hardwoods it can be quite a bit different. 5/4 is 1.25" and so on. It is 6BF.

And if you are building your own home, why buy pre-hung doors? By reducing the size of your cuts, you can use this lumber for picture frames, shelves, and other artistic pieces. The second one is 1254 cubic inches or 209 cubic inches per board foot. A full dimensioned 2x4 has almost as much cross sectional area as a "dressed" 2x6. It is also 6BF. Question I don't understand the dimensions of lumber. I think if you search the archives, you will find a short paper that I wrote and we put here for people that are confused. Now it is a profit item. Hardwoods are sold by the "whole number" or integer board foot and not fractions. And none of my customers have ever complained to me that how I'm measuring board foot is wrong. The price will be the same. Comment from contributor A: They are perfect for builders creating a rustic aesthetic. If a customer asks for 100BF of lumber in 1"x12"x10' and we sell him 10 each 1 x 11.51 x 10'5", as soon as he pulls a tape over the lumber he is going to come back and demand he get what he asked for. The reason all the books say it must be done the other way is because they were not written for the little guys out there. The calculations with softwoods and planed hardwoods are even worse, as softwoods are seldom sold rough, but are sold as planed lumber. Be it 1 1/8" thick x 7 1/4" wide by 8' long. Eastern White Pine can grow four feet in a single year in the right conditions, making it a sustainable choice when searching for rough-sawn pine options. Understanding basic lumber dimensions and how to calculate board footage. The new guys should learn what an actual board foot is before you start teaching them the exceptions, and how the definition of a board foot has been twisted to suit the preferences of giant corporations, and hungry wobbly circle saw blades.

@2021 Reliance Timber All Rights Reserved. The color varies from light brown with a reddish tint to practically white.

Figure out what you need, find out what they are selling and tell them what you want. Now look at a piece that is 1.24 inches thick x 6.49 inches wide and 12.99 feet long. Maybe I am measuring it wrong or figuring it wrong, or selling it wrong, but it works for my customers and me. April 20, 2001. What do 4/4, 5/4, 6/4, 8/4, etc. For example, a 2x4x8' is really 1.5" x 3.5" x 8.00'. If having exposed beams to achieve that classic log cabin style is what youre looking for in your home, then rough sawn pine planks are for you. We createmaster-quality timber for the finest homes using only the most beautiful natural materials. How do you figure board footage? Rough Sawn Pine is often cheaper by volume than standard finished lumber because of its simple processing techniques. mean? Actually, 4/4 goes from 1.00 to 1.24 inches thick. Incidentally, softwood pieces 1x12x10's are 0.75 x 11.25 x 10.0' actual size. The biggest reason for the large scale planing of lumber is to eliminate the poor accuracy of old sawmills, so why should small, accurate mills be penalized for this? 4/4 and the others are thickness measured in quarter inch.

4/4 is 1" thick rough or milled. The first one is 793 cubic inches, or 132 cubic inches per BF. So, 5.33 BF (softwoods use 2 decimals, hardwoods do not) is actually 504 cubic inches, or 95 cubic inches per BF. The definition of board foot is quite tricky, as with hardwoods, the thickness is 1-1/8 inch (often) and not 1-inch (or 4/4).

The system is set up for big business and volume purchases. For softwoods, the definition is for board feet measured to two decimals based on nominal size, not actual. It is ideal for a large spectrum of furniture-making. These are called log scales--3 different types.